Repair: 01296 399984
Manufacture: 01280 817877
 

Paramount Logo
Contact Us


Recent Developments



Automated testing and simulation
Lifts & Printing

Fuji Faldic

Fuji Faldic is a range of AC servo drives used by Komori, among others, to run the more efficient permanent magnet type three phase motors. These motors are less than half the size and weight of a conventional motor.
Paramount has developed simulation techniques, which permit the exercise of FALDIC-Alpha Servo Systems in its sophisticated electronic repair facilities in Aylesbury, Buckinghamshire in the UK.
Service Exchange is available for the FALDIC-Alpha Servo Systems

Fuji Faldic

Komori Eyekom 3A

The Eyekom is in use in Komori print installations around the world.

The purpose of the Eyekom unit is to detect sheets fed into the feeder of a sheet-offset printing press and automatically act during impression as well as acting on the impression-off. Should sheets be improperly fed, or if double sheets are fed, the Eyekom unit stops the feeder. When sheets are improperly fed to the side lay, the Eyekom unit activates an alarm.
Paper position is detected using a number of sensors, using a light source transmitter and a photo transistor receiver, whereby paper is detected as it travels between the source and receiver. In addition, there is a proximity sensor used to count the number of sheets being printed.
Paramount has developed simulation techniques, which permit full functional testing and operation of the Eyekom - 3A.

Komori Eyekom 3A

OVF 20

The OVF 20 was originally manufactured by Otis Elevators Ltd and is in use in a large number of lift installations in the UK and around the world. It is equipped with complex safety and control systems.
Otis OVF 20.
The simulator allows Paramount to identify the causes of any faults and achieve a repair in a fraction of the time that was previously required.

OVF20

TMS 50

The TMS 50 was originally manufactured by Kone Elevators Ltd and is in use in a large number of lift installations in the UK and around the world. It is equipped with complex safety and control system.
Paramount has developed simulation techniques, which permit the exercise of the TMS 50 375 MICROCOMPUTER in its sophisticated electronic repair facilities.

TMS50

Mitsubishi Msd 20-40 range

The MSD-20 20A & 40 Mitsubishi Sheet Detectors are manufactured by Mitsubishi Ltd and are in use in print installations around the world.
Paramount has been carrying out the repair of the MSD-20, 20A & 40 Units.
Customers requiring a repair of MSD-20, 20A or 40 can send them to, or have them collected by, Paramount with the assurance that it can be returned in working condition in just a few days.
The savings in both time and money are significant for customers with installations that must be maintained in full working order.
Service Exchange is available for the MSD-20 & 20A Units

Mitsubishi MSD20/40

Swift Drive E Series

The Swift Drive also is known as QUANTUM QUIET DRIVE is a recent range of Lift drives by ThyssenKrupp Elevator.
The drive is used to power the main motor of the lift car, to transport people smoothly, accelerating and decelerating between floors.
Paramount Electronics Ltd was recently called upon to provide repair support for a series of Swift Drive E Series drives, which had been poorly maintained, risking the integrity of the lift installation in which they were fitted.
The drives are fitted with intelligent power modules which are both expensive and hard to obtain. We have developed test techniques that permit us to validate the functioning of these modules including determining any signal failures.

Swift Drive E Series

Contact Paramount Electronics

If you require expert repair services for your industrial or commercial electronic equipment, spare parts for your Komori machinery, or a printed circuit board repair, get in touch with a member of the team at Paramount Electronics today.